Pure sine inverter, 2000W
Renogy P2 2000W Pure Sine Inverter Specs and Sizing
Researched from published standards and manufacturer specifications. Updated .
Quick answer
This is a specification sheet rather than a review. Every figure below comes from the manufacturer listing, and we do not test products in person. What this page adds is context: what these numbers mean for an RV system, and what else you need to buy alongside it.
Best for: A 200Ah lithium bank with a 200A BMS.
Renogy P2 2000W Pure Sine Inverter specifications
| Specification | Value |
|---|---|
| Watts | 2000 |
| Waveform | Pure sine |
| Input Voltage | 12 |
Published standard Source: Manufacturer listing. Specifications and pricing change without notice. Confirm on the listing before buying.
What does this component need alongside it?
An inverter needs short, heavy cable to the bank, a fuse at the battery end sized to the cable, and a battery BMS rated to supply the DC current the inverter pulls at full load. That last check is the one most often skipped.
How does it compare with other pure sine inverter, 2000w options?
| Component | Price | Notable spec |
|---|---|---|
| Renogy P2 2000W Pure Sine Inverter | $285.99 | watts: 2000 |
| BELTTT 2000W Pure Sine Inverter | $161.99 | watts: 2000 |
| LANDERPOW 2000W Pure Sine Inverter | $127.49 | watts: 2000 |
Published standard Source: Manufacturer listings.
BELTTT 2000W Pure Sine Inverter
$161.99A 4000W surge rating gives headroom for the startup spike of a compressor without nuisance shutdowns.
Best for: A residential fridge plus occasional high draw.
Check price on Amazon
LANDERPOW 2000W Pure Sine Inverter
$127.49The lowest cost 2000W pure sine unit here. Note that it is an inverter only, with no charger and no transfer switch.
Best for: Adding inverter capacity where a converter already handles charging.
Check price on AmazonPure sine inverter, 2000W options
Renogy P2 2000W Pure Sine Inverter
$285.99At 2000W a 12V inverter can draw close to 200A, so it needs a battery with a BMS rated to match. Renogy publishes that draw.
Best for: A 200Ah lithium bank with a 200A BMS.
Check price on Amazon BELTTT 2000W Pure Sine Inverter
$161.99A 4000W surge rating gives headroom for the startup spike of a compressor without nuisance shutdowns.
Best for: A residential fridge plus occasional high draw.
Check price on Amazon LANDERPOW 2000W Pure Sine Inverter
$127.49The lowest cost 2000W pure sine unit here. Note that it is an inverter only, with no charger and no transfer switch.
Best for: Adding inverter capacity where a converter already handles charging.
Check price on AmazonFrequently asked questions
- What is the Renogy P2 2000W Pure Sine Inverter best for?
- A 200Ah lithium bank with a 200A BMS. At 2000W a 12V inverter can draw close to 200A, so it needs a battery with a BMS rated to match. Renogy publishes that draw. Confirm the current specification on the listing before buying, because manufacturers revise these products without changing the model name.
- Is the Renogy P2 2000W Pure Sine Inverter suitable for a lithium system?
- Check the charge profile before pairing it with lithium. The requirement is a genuine LiFePO4 profile with the correct absorption voltage, not a lead-acid profile with a lithium label. Where a component only charges at lead-acid voltages, a lithium pack will sit permanently short of full.
- What size cable and fuse does it need?
- That depends on the current it carries and the length of the run, not on the component itself. Work out the current from its rating, then size the conductor for both ampacity and voltage drop with the wire gauge calculator, and fuse it at 125 percent of the continuous load rounded up to the next standard rating.
Wiring safety. Never exceed a conductor's rated ampacity, and always fuse a circuit at or below what the wire can carry, because the fuse protects the wire rather than the appliance. Fuse every positive conductor as close to the battery as practical. Use proper crimped lugs and heat shrink rather than twisted joints, support cable so it cannot chafe through on a frame edge, and keep the battery compartment ventilated. Permanent AC wiring is work for a qualified RV technician or a licensed electrician.